Biuret reagent B

Reflecta Laboratory Supplies provide quality chemical solutions and reagents manufactured inhouse. Our RLS Chemical solution complies with NIST standards
Biuret reagent B – Identification of Product Chemical Code: RLS-SOL-B31 to B 32 Chemical Name: Biuret’s Reagent B Chemical Grade: Chemical Formula: No Data Available Chemical Weight: CAS No: Chemical Synonyms: Biuret reagent
• Hazards Identification: REACH No: No Data Available Signal Word: Danger. Supplemental Hazard Information: Additional Hazard Information: This mixture contains no components considered to be either persistent, bio-accumulative and toxic (PBT), or very persistent and very bio-accumulative (vPvB) at levels of 0.1% or higher. Hazards statementsH290 – May be corrosive to metals. H314 – Causes severe skin burns and eye damage. H411 – Toxic to aquatic life with long lasting effects.
• Precautionary statements: P260 – Do not breathe fume/ gas/ mist/ vapours/ spray. P280 – Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 + P310 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Composition of Chemical: Chemical Formula: No Data Available EC No 1272/2008: No Data Available
• First Aid Measures: General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance. If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. If: Skin Contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician. If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Important Symptoms: The most important known symptoms and effects are described in the labeling section. Immediate Medical Attention: No Data Available
• Firefighting Measures: Extinguishing Media: Use Water spray, Alcohol-resistant foam, Dry chemical or Carbon Dioxide. Hazards Arising: Sodium Oxides Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary. Info for Firefighting: No Data Available
• Accidental Release Measures: Personal Precautions: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Method for Containment: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
• Handling and Storage: Personal Precautions: Avoid inhalation of vapour or mist. Environmental Precautions: Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Storage class (TRGS 510): Non combustible liquids, corrosive. Recommended storage temperature2 -8 °C
• Exposure Controls: Personal Protection Derived No Effect Level (DNEL) Workers | Application Area | Exposure Routes | Health Effect | Value No Data Available Consumers | Application Area | Exposure Routes | Health Effect | Value No Data Available Predicted No Effect Concentration (PNEC) No Data Available Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Eye/Face Protection: Tightly fitting safety goggles. Face shield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact – Material: Nitrile rubber. Minimum layer thickness: 0.11 mm Break through time: 480 min. Material tested: Dermatril® Splash contact – Material: Nitrile rubber. Minimum layer thickness: 0.11 mm Break through time: 480 min. Material tested: Dermatril® Data source: KCL GmbH, D-36124. Test method: EN374. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection: Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination type OV/AG (US) or type ABEK (EU EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
• Physical and Chemical Properties: Appearance: Blue liquid Odour: No Data Available Odour Threshold: No Data Available pH: No Data Available Melting Point: No Data Available Boiling Point: No Data Available Flash Point: No Data Available Evaporation: No Data Available Flammability: No Data Available Upper/Lower Flammability or Explosive Limits: No Data Available Vapour pressure: No Data Available Vapour density: No Data Available Relative density: No Data Available Water solubility: Miscible Partition Coefficien: No Data Available Auto-ignition Temperature: No Data Available Decomposition Temperature: No Data Available Viscosity: No Data Available Explosive properties: No Data Available Oxidizing properties: No Data Available Other Safety Info: No Data Available
• Stability and Reactivity: Reactivity: No Data Available Chemical Stability: Stable under recommended storage conditions. Possibility of hazardous reactions: No Data Available Conditions to Avoid: No Data Available Incompatible Materials: Zinc, Steel (all types and surface treatments), Alkali metals, Powdered metals, Strong oxidizing agents, Strong acids, Organic materials, Cadmium, Copper, Nickel, Anhydrous Copper(II) Sulphate, Hydroxylamine. Reacts violently with Brass, Aluminum, Strong reducing agents, Magnesium, and its alloys. Hazardous Decomposition Products: Hazardous decomposition products formed under fire conditions – Sodium Oxides
• Toxicological Information: Acute Toxicity: No Data Available Skin Corrosion/Irritation: No Data Available Serious Eye damage | Eye Irritation: No Data Available Cell Mutagenicity: No Data Available Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity: No Data Available Specific Target Organ Toxicity – Single Exposure: No Data Available Specific Target Organ Toxicity – Repeated Exposure: No Data Available Aspiration Hazard: No Data Available
• Ecological Information: Ecological Toxicity: No Data Available Ecological Persistence and degradability: No Data Available Page 5 | Revised Date : 2020-11-13 Bioaccumulative Potential: No Data Available. Mobility in Soil: No Data Available Results of PBT and vPvB Assessment: This mixture contains no components considered to be either persistent, bio-accumulative and toxic (PBT), or very persistent and very bio-accumulative (vPvB) at levels of 0.1% or higher. Other Adverse Effect: Toxic to aquatic life.
• Disposal Considerations: Waste Treatment Methods: Product – Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging – Dispose of as unused product.
• Transport Information: UN Number: ADR/RID: 1824 IMDG: 1824 IATA: 1824 UN Shipping Hazard: ADR/RID: SODIUM HYDROXIDE SOLUTION IMDG: SODIUM HYDROXIDE SOLUTION IATA: Sodium Hydroxide solution Transport Hazard Class: ADR/RID: 8 IMDG: 8 IATA: 8 Packaging Group: ADR/RID: III IMDG: III IATA: III Environmental Hazards: ADR/RID: no IMDG Marine pollutant: no IATA: no Special Precautions: No Data Available
• Regulatory Information: Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Chemical Safety Assessment: For this product a chemical safety assessment was not carried out. Additional Info: RTECS: Not Available. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin. Spasm, inflammation and edema of the larynx. Spasm, inflammation and edema of the bronchi. Pneumonitis, Pulmonary edema, Burning sensation, Cough, Wheezing, Laryngitis, Shortness of breath, Headache, Nausea.
• Disclaimer: The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s properties. RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product

• Chemical Code: RLS-SOL-B31 to B 32
• Chemical Name: Biuret’s Reagent B
• Chemical Grade: NA
• Chemical Formula: No Data Available
• Chemical Weight: NA
• CAS No: NA
• Chemical Synonyms: Biuret reagent
• {‘Volume’: ‘500ml’, ‘Price’: ‘R163.28 Incl VAT’}
• {‘Volume’: ‘1000ml’, ‘Price’: ‘R287.80 Incl VAT’}